MAIN MENU
  HISTORY
 

:: Location

 
 
 
 
 
 

 

 
 
OUR SERVICE

Complete Auto Electrical Service

All light problems

In the event that your vehicle lights are not working it may cause a vehicle malfunction or accidents as well as a moving violation.

Examples;

* Brake light
* Car tail lights
* Driving lights
* Head lights
* Led lights
* Replacement Bulbs
* Trailer lights
* Vehicle vanity lights

Fuel Injection Repair

Fuel injection is a system for mixing fuel with air in an internal combustion engine. A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle most fuel injection systems are for gasoline or diesel applications.

Benefits

Operational benefits to the driver of a fuel-injected car include smoother and more dependable engine response during quick throttle transitions, easier and more dependable engine starting, better operation at extremely high or low ambient temperatures, increased maintenance intervals, and increased fuel efficiency

Short Circuit

A short circuit is an abnormal low-resistance connection between two nodes of an electrical circuit that are meant to be at different voltages. Sometimes electrical shorts develop from wires that have lost their insulation and rub bare wire against metal in the car. Shorts that go with out repair will eventually wear down batteries and alternators.

Aside from replacing the belt that turns the alternator about every 40,000 to 50,000 miles and replacing the battery approximately every three years there are no regularly scheduled maintenance items in your car electrical system.

Power window and lock

If you are having problems with your power window or locks here at Decatur Auto Electric our qualified experience technicians can repair most problems for example:

* Power window motors
* Power window regulators
* Power window switch
* Power window shorts
* Power window lock
* Power window harness wires
* Power door lock actuators
* Power door lock switch
* Power door lock shorts
* Power door lock harness wires

Starter

Car starters and truck starters have to deliver loads of torque for cranking vehicle engines in all weather conditions. In cold or hot weather, starter heat soak can create and iffy start up. Either way you are not getting anywhere if your starter motor decides to give up. We offer quality starter motors and great warranties.

Alternator

The alternator consists of a spinning set of electrical windings called a rotor, a stationary set of windings called a stator, a rectifier assembly, a set of brushes to maintain electrical contact with the rotor, and a pulley. All of these parts except the pulley are contained in an aluminum housing. Alternators use compact, electronic voltage regulators that may be housed inside the alternator or the voltage regulator function.

The alternator generates direct current for recharging the battery and for powering vehicle electrical loads.

Ignition switch

A car's ignition switch serves several purposes. First, it allows you to control the power to many of the car's accessories, preventing accessories from running down the ca's battery when the car is parked for a long period of time. The ignition switch also serves the far greater purpose of connecting the starter to the battery, allowing the battery to send a powerful surge of electricity to the starter when the car is being started. When the ignition switch fails, generally the electrical wiring or the plastic housing develops problems.

The car may not turn on and/or start when this happens. Also, the spring-loaded start position could malfunction. Replacing an ignition switch can be tricky business, particularly in newer cars, because of the anti-theft devices used in cars.

A/C service

It has always been our goal to ensure complete satisfaction of every customer that's why we are here to offer you "worry-free" air conditioning services get ready for the summer bring your car to our repair shop we can provide the following services

* Air conditioning repair
* Air conditioning installation
* Air conditioning parts

Steering column

Also known as power assisted steering, power steering is a mechanism that helps the driver of an automobile to steer the vehicle. In most automobiles, it relies on a hydraulic system to aid in turning the vehicle’s wheels. Power steering is a standard feature in nearly every modern car and truck

Complete Auto Mechanical Service

Brakes

Brake pads must always be replaced simultaneously on both ends of a vehicle's axle, as the different lining thicknesses (and possibly material types) will cause uneven braking, making the vehicle pull in the direction of the more effective brake. For most vehicles, replacing pads (and therefore linings) is very easy, requiring a minimum of tools and time — the linings are designed to be consumable and should therefore be easy to service.

Brake linings can also be found just about everywhere there are braking systems, from elevator safety brakes to spindle brakes inside a VCR. The form and materials are frequently different, but the principle is the same.

Suspension

Suspension is the term given to the system of springs, shock absorbers and linkages that connects a vehicle to its wheels. Suspension systems serve a dual purpose – contributing to the car's road holding/handling and braking for good active safety and driving pleasure, and keeping vehicle occupants comfortable and reasonably well isolated from road noise, bumps, and vibrations, etc. These goals are generally at odds, so the tuning of suspensions involves finding the right compromise. It is important for the suspension to keep the road wheel in contact with the road surface as much as possible, because all the forces acting on the vehicle do so through the contact patches of the tires. The suspension also protects the vehicle itself and any cargo or luggage from damage and wear. The design of front and rear suspension of a car may be different

Timing Belt

Timing belts are engineered to last at least 60,000 miles, with some newer designs lasting the life of the engine. Vehicle owners are urged to replace timing belts according to the car manufacturer's recommendations. If a timing belt fails completely, the entire engine will grind to a halt and the car will become inoperable. In a worst case scenario, the valves and pistons may drive themselves into the camshaft and become hopelessly bent or broken. There is usually very little warning before timing belts fail, so a timely replacement may be the best prevention.

Water Pump

An automobile water pump is part of the cooling system that is used inside most car engines. A functioning water pump is mandatory for the car to work, as it keeps the engine temperature below a certain threshold. Most vehicles have a combustion engine, which generates a considerable amount of heat.

A broken water pump will result in a steadily increasing engine temperature. If the car continues to operate without a cooling system, then the engine will overheat and stop working. A trained automobile mechanic is required to replace a broken water pump.

Fuel Pump

There are several things you may consider when checking your fuel pump for problems. Any number of things can go wrong with an overused fuel pump, and discovering the severity of the issues along with the causes can help you prolong the life of your pump and vehicle.

One of the early warning signs of a bad fuel pump is the development of a high pitched sound when the engine is first engaged. Different types of fuel pumps will make slightly different sounds. This phenomenon has been described as a sound somewhat like a tea kettle whistling, while others claim the sound was more like nails scraping across an old fashioned chalkboard. Regardless of the exact sound emitted by the fuel pump, it is important to get your vehicle to a mechanic quickly. The fuel pump is not likely to keep functioning much longer.

Head gasket

A head gasket is located between the head and the block of the engine. It keeps the head separate from the block, cushioning the two, and preventing them from touching and creating friction. A blown head gasket can occur when a vehicle overheats

Motor Mount

Motor is a device that creates motion, not an engine; it usually refers to either an electrical motor or an internal combustion engine.

Motor mounts (engine mounts) are used to connect a car engine to the car frame. They are usually made of rubber and metal. The metal portion connects to the engine on one side and to the frame on the other. The rubber is in-between to provide some flexibility (so engine shake doesn't cause the car to shake). Newer cars may use slightly different mounts, however, there purpose is the same. Provide the connection from the engine to the car frame. The number of motor mounts varies from car to car.

Clutch Work

A clutch is a mechanical device which provides driving force to another mechanism, typically by connecting the driven mechanism to the driving mechanism. Its opposite component is a brake, which inhibits motion.

Clutches are useful in devices that have two rotating shafts. In these devices, one shaft is typically attached to a motor or other power unit (the driving member), and the other shaft (the driven member) provides output power for work to be done. In a drill, for instance, one shaft is driven by a motor, and the other drives a drill chuck. The clutch connects the two shafts so that they can either be locked together and spin at the same speed (engaged), or be decoupled and spin at different speeds (disengaged).

Follow Us in Social Media.- CLICK HERE

 
 
       
 
 
© DECATUR AutoElectric, 2010, Las Vegas NV, Online Marketing and Web Design By: AT MARKETING PRO 702-722-9511